TagUI course and learning TagUI

  • TagUI course and learning TagUI

     brownie updated 2 weeks, 5 days ago 5 Members · 22 Posts
  • ruthtxh

    Organizer
    August 16, 2021 at 10:56 pm

    Thread for anything related to RPA Exercise and learning TagUI

  • kensoh

    Organizer
    September 12, 2021 at 2:44 pm

    The first ever course for TagUI RPA is published! Free self-guided video course with an elaborate mock-up HR website. Finely crafted by my team-mate Ruth, along with inputs from AI/RPA Advisory team and my feedback.

    This course is suitable for everyone. It consists of 17 modules and estimated to take 2.5 hours. Even if you decide to go at it slowly, you can complete it in one morning or afternoon. And be productive right away with one of the leading open-source RPA options. TagUI and its various flavours created by extended community champions are fully free, no paid version or fees whatsoever.

    The course is now in preview as Ruth tie up any loose ends with feedback from her course users. On the roadmap, AI/RPA Advisory team is planning to create an intermediate course, which shares more tips on leveraging the rich Python ecosystem of packages to do more with less (targeted for business users).

    Learn RPA with TagUI – Beginners Course

  • brownie

    Member
    October 17, 2021 at 5:22 am

    Hi, I can’t get my first automation to run, thanks in adv for your advice!

  • ruthtxh

    Organizer
    October 17, 2021 at 11:38 am

    @brownie thanks for raising this! You may have accidentally named your document login.docx instead of login(.docx extension) Try renaming it and run again? 🙂

  • brownie

    Member
    October 17, 2021 at 2:31 pm

    Hi @ruthtxh , thanks for your prompt response. Is there a version requirement for ms office? I’m on ver 2010. When the file was saved, it wasn’t with the extension. When I try to rename, there’s a warning prompt to advice me against removing the extension. Attached the screen for just running the login subflow – encountered the same error.

  • ruthtxh

    Organizer
    October 17, 2021 at 5:42 pm

    @brownie 2010 should work fine. Try renaming from the windows file explorer and run again? If the prompt persist, does ignoring it help?

  • brownie

    Member
    October 17, 2021 at 7:38 pm

    Hi @ruthtxh , renamed both login and main without the extensions, n here’s how the situation looks… did I miss something? 😇

    To open the files now, I need to select Open with MS Word.

    When I run Main, there was an error prompt to close the file – which it wasn’t open in the first place.

    When I run Login, it was the same error msg.

  • ruthtxh

    Organizer
    October 17, 2021 at 10:25 pm

    @brownie I see. Seems like your other files may have the extension showing also so it should be correct sorry. Could you kindly revert back to the original extension main.docx and login.docx.

    After this, can you try renaming your folder to exclude spaces instead? I’m not sure which version of the AddIn you are using, but it shouldn’t be an issue to save to folders with spaces in the later versions. You can get the latest version here https://tagui.readthedocs.io/en/latest/setup.html

  • brownie

    Member
    October 18, 2021 at 12:09 am

    Thank you @ruthtxh ! YEEESSSS…. it’s the folder space! Took out the space and that’s it! :😁

    How may I check TagUI ver btw? When I click update on MS word, it shows Error – cannot find updates.

    • kensoh

      Organizer
      October 18, 2021 at 11:03 am

      Oh great! It sounds like you may be using an earlier version of TagUI. Can you try downloading v6.46 from this link? – https://tagui.readthedocs.io/en/latest/setup.html

      From v6.46 onwards, users are able to update to latest TagUI version with new features and bug-fixes, by clicking on Update TagUI button in the MS Word Plug-in. Users can also update with tagui update command from the command prompt. Before v6.46, there isn’t such an update feature and requires manually downloading and overwriting existing installation.

      • brownie

        Member
        October 21, 2021 at 8:00 pm

        Thanks! Manage to run upgrade successfully! =)

        • kensoh

          Organizer
          October 21, 2021 at 11:56 pm

          Oh great, have fun! =)

  • susanaribeiro

    Member
    December 23, 2021 at 5:34 am

    Hi!

    First of all, thank you for the tutorial.

    I was trying to do the RPA Exercise, but I’m getting an error in chapter 6 (and 7, 8,…). It works in the first iteration, but in the second and third time that the automation must click newJobPosting, it doesn’t work. It appears a blank page and, in Terminal, I get this info:

    START – automation started – Wed Dec 22 2021 21:30:12 GMT+0000 (WET)

    https://rpaexercise.aisingapore.org/login – RPA Exercise

    type username as jane007

    type password as TheBestHR123

    click login

    click newJobPosting

    type jobTitle as Training and Development Specialist

    type jobDescription as The responsibility of this role is to come up with structured programmes to meet the learning needs of employees.

    select hiringDepartment as Human Resource

    select educationLevel as Diploma

    type postingStartDate as 12/10/2021

    type postingEndDate as 30/11/2021

    click //*[@id=”remote”]/label[2]/span[1]/span[1]/input

    click jobTypeFullTime

    click Submit

    wait 5

    https://rpaexercise.aisingapore.org/jobs – RPA Exercise

    FINISH – automation finished – 41.2s

    START – automation started – Wed Dec 22 2021 21:30:57 GMT+0000 (WET)

    click newJobPosting

    ERROR – cannot find newJobPosting

    START – automation started – Wed Dec 22 2021 21:31:16 GMT+0000 (WET)

    click newJobPosting

    ERROR – cannot find newJobPosting

    Can you help me, please?

    Thanks in advance.

  • ruthtxh

    Organizer
    December 23, 2021 at 9:33 am

    Hi @susanaribeiro

    Please go to your terminal and run the command “tagui update”. This will pull the latest version which includes the fix for running multiple datatable records without opening the about blank page multiple times.

    Thanks!

  • susanaribeiro

    Member
    December 23, 2021 at 9:54 pm

    Ok. Thanks. It’s working now.

  • adheng

    Member
    March 31, 2022 at 5:05 pm

    hi i was following ur online class, but encounter the following the error. it is telling me that iteration is not a variable..am i missing any steps? btw,

    • ruthtxh

      Organizer
      April 1, 2022 at 10:34 am

      Hello @adheng can you try and update TagUI by clicking the Update button in the ribbon? The latest version is v6.108. Thanks!

  • adheng

    Member
    April 6, 2022 at 2:05 pm

    hi Ruth. just to update u. previously even after updating to the latest version, it was not working. i only manage to get it to work by uninstalling and reinstall it altogether. thks

    • ruthtxh

      Organizer
      April 10, 2022 at 11:32 am

      Thanks for sharing back! Glad it works now.

  • adheng

    Member
    April 11, 2022 at 12:28 pm

    hi ruth, i was trying to install TAGUI in a administrator controlled laptop and i am encountering a weird scenario. i am only able to run TAGUI successfully on the 1st time when i reset my laptop. subsequent runs will always fail with the CMD prompt stuck in “listening for inputs”. i had try in both CMD prompt and in the world addin and are facing the same issue. not sure u guys had seen these kind of problem and have suggestions on how to fix it…thks in advance…:)

    • ruthtxh

      Organizer
      April 12, 2022 at 12:17 pm

      Hi @adheng I don’t think this issue was reported before.. Thanks for checking that this happens both when running from cmd prompt and the addin so we can isolate that it is an issue with core TagUI. Can you see if there’s any more clues in the logs in the folder tagui\src\tagui.sikuli?

Viewing 1 - 15 of 16 replies